Engine Oil and Oil Filter Replacement Opel Agila B

Remove

Important. Observe the relevant environmental regulations when disposing of used engine oil.

1. 1. Remove oil filler cap
2. 2. Raise vehicle
3. 3. Drain engine oil • Place collecting container below • Remove drain plug
4. 4. Remove oil filter from oil pan • Place collecting container below • Use Oil Filter Wrench KM-648

Install

5. 5. Install new oil filter to oil pan • Apply clean engine oil to seal ring • Secure oil filter 14 Nm – Use Oil Filter Wrench KM-648
6. 6. Install drain plug 35 Nm to oil pan • Install new sealing washer

7. 7. Lower vehicle
8. 8. Fill engine with oil to correct level
9. 9. Install oil filler cap
10. 10. Start engine to prime oil filter • Run engine until oil pressure indicator lamp has extinguished
11. 11. Stop engine, check and adjust oil level if necessary

Note. Wait until engine oil has settled to correct level.