Fit the cylinder head cover (1)
Tighten the bolts (2) to 1.0 m.daN
Engines with cylinder head cover secured by 10 bolts
Tighten the 10 bolts to 1.0 da.Nm. in the order shown
NoteThe cylinder head covers have composite gaskets which can be used several times; if the gasket is damaged, it can be partially repaired with AUTO JOINT OR jointing paste
Tighten the bolts to 1 da.Nm. in the order indicated (from (1) to (6))
Refit (depending on engine type): the compact coil unit
Connect the pipes, cables and harnesses connected to the cylinder head
Tighten the bolts to 2 m.daN
Refit: the breather (4) with its tubes
Refit: the exhaust manifold (5) and its new gasket
Tighten the bolts (6) to 3.5 m.daN
Refit the various components in the reverse order to removal