ECU information available
Actuator test: yes
Measure parameters: yes
Characterised by: no spark
Checks to be carried out if fault is present: no spark
| conditions under which the fault appears | checks to be made - conditions for checking |
|---|---|
| engine running | verify: ignition on, ECU connected - presence of 12 V on terminal(s) G3 of the connector of the ECU (32 V.NR). warning -> presence of voltage, for 2/3 seconds after the ignition has been switched on, ECU connected, coil disconnected - no voltage at terminal(s) G3 of the control unit 32 V.NR. warning -> if V is present for 2/3 seconds after switching on the ignition, short circuit with a function supplied by +ve after relay, ignition off, control unit disconnected - no earth at terminal G3 on the 32 V.NR connector (ECU) - carry out the actuator test - does the test proceed correctly? |
