Contents Wiring diagrams Section: Power unit All sections

Check: fuel pump control function Peugeot Partner I

ECU information available

Actuators test: yes

Parameter measurements: no

Characterised by

  • Short circuit to positive
  • Short circuit to earth
  • Open circuit

Checks to be carried out if fault is present

Short circuit to positive

conditions under which the fault appearschecks to be made conditions for checking
engine running short circuit to positive on terminal(s) 3, of the ECU 1320ignition on, ECU 1320 connected; multifunction double relay 1304, connected, check: - no voltage at terminal(s) 3 of connector 1320

Short circuit to earth

conditions under which the fault appearschecks to be made conditions for checking
engine running presence of earth at terminal 3 on the 55 V.NR connector, of the ECU 1320ignition off, control unit 1320 disconnected; multifunction double relay 1304, disconnected, check: - no earth at terminal 3 on the 55 V.NR connector

Open circuit

conditions under which the fault appearschecks to be made conditions for checking
engine running open circuit on terminal(s) 3, of the ECU 1320ignition off, control unit 1320 disconnected; multifunction double relay 1304, disconnected, check: - continuity of wire(s) between terminal 3 of the 1320 and terminal 10 of the 1304

+P: battery +ve