Home/Peugeot/Partner/Peugeot Partner I (1997-2002)/Repair manual/Power unit/Check: function - double relay control — variant 2
Contents Wiring diagrams Section: Power unit All sections

Check: function - double relay control — variant 2 Peugeot Partner I

ECU information available

Actuators test: yes

Parameter measurements: no

Characterised by

  • Short circuit to positive
  • Open circuit or short circuit to earth

Checks to be carried out if fault is present

Short circuit to positive

conditions under which the fault appearschecks conditions for checking
cutting off the ECU supply (for the double relay) with no ECU commandcontrol unit disconnected, inertia switch disconnected, ignition off, check: - insulation of wire(s) A, B, C, D, E - condition and operation of double relay 1304 - all private vehicles since 1203 except LCVs and electric vehicles, (LPG or Natural Gas for Vehicles)

Open circuit or short circuit to earth

conditions under which the fault appearschecks conditions for checking
ECU supply cut off (by the double relay) + 2 seconds after the ECU commandcontrol unit disconnected, inertia switch disconnected, ignition off, check: - the continuity and insulation of wire(s) A, B, C, D, E - condition and operation of double relay 1304 - all private vehicles since 1203 except LCVs and electric vehicles, (LPG or Natural Gas for Vehicles)

+P: battery +ve

+BB: battery +ve supply