Home/Peugeot/Partner/Peugeot Partner I (1997-2002)/Repair manual/Power unit/Check: fuel temperature sensor function — variant 2

Contents

Wiring diagrams Section: Power unit

All sections

Check: fuel temperature sensor function — variant 2 Peugeot Partner I

Power unit

ECU information available

Actuators test: no

Parameter measurements: yes

Characterised by

Short circuit to earth
Short circuit to positive or open circuit

Checks to be carried out if fault is present

Short circuit to earth

conditions under which the fault appears	checks conditions for checking
voltage below 0.05 V on terminal 39 of connector 88V.NR of the injection ECU 1320	control unit disconnected, ignition off, check: - resistance correct with the table of values between terminals 39 and 22 of connector 88V.NR - the continuity and insulation of wire(s) A, B

Short circuit to positive or open circuit

conditions under which the fault appears	checks conditions for checking
voltage greater than 4.95 V on terminal 39 of connector 88V.NR of the injection ECU 1320	control unit disconnected, ignition off, check: - resistance correct with the table of values between terminals 39 and 22 of connector 88V.NR - the continuity and insulation of wire(s) A, B

Check: fuel temperature sensor function — b1hkzdyd