How to Replace the Engine Stabiliser, Upper Opel Vivaro A

Remove

1. 1. Remove upper engine stabiliser • Release stabiliser from inner wing – Remove bolt (1) • Release stabiliser from support bracket – Remove bolt (2)

Note. Engine may require slight movement when removing bolt.

Install

2. 2. Install new upper engine stabiliser • Loosely install bolt (2); do not tighten at this stage • Secure stabiliser to inner wing – Install bolt (1) 100 Nm • Secure stabiliser to inner wing – Tighten bolt (2) 100 Nm

Note. Engine may require slight movement when installing bolt.