Time Allowance Opel Vectra B

Fuel Injection Systems

Op. No.	Operation	TC-P ...	Time Allow.
W 1000 00	Move vehicle from parking place to working area and back		.2
	TC: 99

J 8503 20	Trouble Code - Read Out		.1
	Multec (F) X 16 SZR,
	Multec-(S) (F) X 16 XEL
	TC: 99
	(With TECH 1)

	Add:

	No Trouble Codes stored

001	F0: F0: DATA LIST		.3
	Table B-03, Test 01 - 48

002	F1: EXHAUST GAS TEST		.1
	Table B-04, Test 07, 26, 28

003	F5: ACTUATOR TEST		.1
	Table B-05, Test 01 - 02

004	F5: ACTUATOR TEST		.2
	Table B-05, Test 03 - 04
005	F5: ACTUATOR TEST		.1
	Table B-05, Test 05 - 08

006	F5: ACTUATOR TEST		.1
	Table B-05, Test 09 - 13

007	F6: ADDITIONAL FUNCTIONS		.1
	Table B-06, Test 01 - 02

008	F6: ADDITIONAL FUNCTIONS		NV
	Table B-06, Test 03 - 05

009	F6: ADDITIONAL FUNCTIONS		.1
	Table B-06, Test 06 - 09

010	F7: PROGAMMING		.1
	Table B-07, Test 01 - 02

011	F8: ECU CONTROL TEST		.1
	Table B-08, Test 01 - 04

	Trouble-shooting with table C:

012	C-01 No Communication between Diagnostig Tester and Control Unit		.2

013	C-03 System Voltage	0560	.1


014	C-05 Fuel Pump Relay	0230, 1231	.1
015	C-06 Throttle/Pedal Position Sensor/Switch A	0120	.1

016	C-07 Manifold Absolute Pressure Solenoid	0150	.1

017	C-08 Engine Coolant Temperature Sensor	0115	.1

018	C-09 Intake Air Temperature Sensor	0110	.1

019	C-10 Park/Neutral Switch		.1

020	C-11 Air Conditioning System Information Switch		.1

021	C-12 Air Conditioning System Load Signal		.1

022	C-13 Camshaft Position Sensor	0340	.1

023	C-15-16 Ignition Coil A-B Primary/Secondary Circuit	0351, 0352	.2

024	C-17 Injector	0200	.1

025	C-18 Knock Sensor 1	0325, 1602	.1

026	C-19 Secondary Air Pump	1410	.1

027	C-20 Secondary Air Injection System Switching Valve A	0412	.1

028	C-21 Linear Exhaust Gas Recirculation Sensor	400	.1

029	C-22 Exhaust Gas Recirculation Sensor	1405	.1

030	C-23 Evaporative Emission Control System Circuit	0443	.1


031	C-24 O2 Sensor Circuit	0130, 0170	.1

032	C-25 Crankshaft Sensor	0335

033	C-26 Idle Speed Actuator	0505	.1

034	C-27 Engine Speed Output Signal		.1

035	C-28 Engine Load Signal		.1

036	C-29 Torque Control	1740	.1

037	C-30 Air Conditioning System Relay	1530	.1

038	C-33 Blinkcode Request		.1

039	C-37 Fuel Consumption Signal		.1

	If required for carrying out certain test steps:

040	Disconnect and connect wiring harness connector of Multec control unit		.2

041	Remove and install Radio		.2

042	Remove and install Instrument-assembly		.4

043	Multec control unit programming (SPS)		.3

Time Allowance Opel Vectra B

More articles — Engine and Engine Aggregates

Login / Signup

Enter the code

You have successfully logged in!