Replace Lambda Sensor, Catalytic Converter Control (Z 18 XE, with AC, Lhd) Opel Meriva A

1. 1. Open bonnet
2. 2. Raise vehicle
3. 3. Remove lambda sensor, catalytic converter control (3) • Detach wiring harness plug (2) • Use KM-6129 (1)

Note. Unscrew carefully.

4. 4. Install lambda sensor, catalytic converter control • Tighten lambda sensor for catalytic converter control – Use KM-6129 – Tightening torque 30 Nm • Connect wiring harness plug

Note. Apply special grease to thread

5. 5. Lower vehicle
6. 6. Close bonnet