Home/Opel/Meriva/Opel Meriva A (2003-2011)/Repair manual/Fuel Injection Systems/Replace Accelerator Pedal Module

Contents

Wiring diagrams Section: Fuel Injection Systems

All sections

Replace Accelerator Pedal Module Opel Meriva A

Fuel Injection Systems 1 illustration

Remove

1. Remove inner panelling of bottom instrument panel padding at driver's side • Unscrew 2 bolts • Remove panelling
2. Remove accelerator pedal • Disconnect wiring harness plug (1) • Unscrew 3x nuts (2)

Replace Accelerator Pedal Module

Install

3. Install accelerator pedal • Tighten 3x nuts – Tightening torque 9 Nm • Connect wiring harness plug.
4. Install inner panelling of bottom instrument panel padding at driver's side • Insert panelling • Screw in 2x bolts