Contents Wiring diagrams Section: Fuel Injection Systems All sections

Replace Crankshaft Sensor (Z 18 XE) Opel Meriva A

Fuel Injection Systems 1 illustration
  1. 1. Open bonnet
  2. 2. Raise vehicle
  3. 3. Remove crankshaft sensor (1) • Detach wiring harness plug (2) • Unscrew bolt
  1. 4. Install crankshaft sensor • Renew seal ring • Tighten bolt – Tightening torque ( 10 Nm ) • Connect wiring harness plug
  2. 5. Lower vehicle
  3. 6. Close bonnet