Cylinder Head
Note: Regrinding of cylinder head is not permitted
Cylinder Head Gasket Identification
| With piston projection (mm) | Hole Identification |
Less than 0.868
0.868 to 1.000
| More than 1.000 | 2 |
| 3 |
Valve Seat Reworking
Valve seat angle
Inlet
| Exhaust |
120°
| 90° |
Valve seat width (mm)
Inlet
| Exhaust |
1.8
| 1.8 |
Valve Dimensions (mm)
Stem diameter
Inlet
| Exhaust |
8.0
| 8.0 |
Head diameter
Inlet
| Exhaust |
41.0
| 34.5 or 36.7 |
Valve Spring Dimensions (mm)
| Free height | 43.41 |
|---|---|
| Wire diameter | 4.45 |
| Coil internal diameter | 21.5 ±. |
Length under load (Nm)
230
| 705 |
37.9
| 28.4 |