Cylinder Liner, Check
| .D. ICON01.tif | 0,75 | 0,75 | tiff;; Remove, Disconnect |
Engine - see operation ‘Engine Without Transmission, Remove and Install.
| Crankshaft - see corresponding operation. | |||
|---|---|---|---|
| .P. T0732.tif | 9 | 7,5 | tiff;; |
| .D. ICON07.tif | 0,75 | 0,75 | tiff;; Measure |
Cylinder liner bore at two points 90° apart, in three axial positions - use internal micrometer and measure at ‘A’ 10 mm from top of bore, at ’B’ in the centre of bore, and at ‘C’ 10 mm from bottom of bore.
Cylinder liner bore = 93.000 to 93.018 mm.
Repair size = 93.200 to 93.218 mm.
If measured value exceeds limit, replace cylinder liner - see corresponding operation.
| .D. ICON02.tif | 0,75 | 0,75 | tiff;; Install, Connect |
Crankshaft - see corresponding operation.
| Engine - see operation ‘Engine Without Transmission, Remove and Install’. | |||
|---|---|---|---|
| .P. T0735.tif | 9 | 7,5 | tiff;; |