Cylinder Head, Check for Plane Surface
Support cylinder head safely.
| .D. ICON01.tif | 0,75 | 0,75 | tiff;; Remove, Disconnect |
Swirl chambers, if necessary - see corresponding operation.
| .D. ICON07.tif | 0,75 | 0,75 | tiff;; Measure |
Cylinder head for deformations along length and width as well as for warping along the diagonals - use suitable straight edge and feeler gauges.
Maximum deformation of plane surface is 0.05 mm.
| .D. ICON11.tif | 0,75 | 0,75 | tiff;; Important! Regrinding of cylinder head is not permitted. |
|---|---|---|---|
| .P. S0005170.tif | 9 | 7,5 | tiff;; |
| .D. ICON02.tif | 0,75 | 0,75 | tiff;; Install, Connect |
| Swirl chambers, if necessary - see corresponding operation. |