Rear Crankshaft Radial Seal Ring Replace — Engine and Engine Aggregates — Diesel Engine

Rear Crankshaft Radial Seal Ring Replace Opel Arena I

Crankshaft Oil Seal Assembly, Rear, Replace

.D. ICON01.tif

0,75

tiff;; Remove, Disconnect

Hose air filter to inlet manifold.

Starter - see corresponding operation.
.P. T3209.tif	9	7,5	tiff;;
.D. ICON01.tif	0,75	0,75	tiff;; Remove, Disconnect

Transmission and clutch - see operations in group K.

Flywheel from crankshaft - see corresponding operation.
.P. T3308.tif	9	7,5	tiff;;
.D. ICON01.tif	0,75	0,75	tiff;; Remove, Disconnect

Crankshaft rear oil seal.

.D. ICON02.tif	0,75	0,75	tiff;; Install, Connect
Crankshaft rear oil seal - Installer KM-6029.
.P. T3198.tif	9	7,5	tiff;;
.D. ICON02.tif	0,75	0,75	tiff;; Install, Connect

Flywheel to crankshaft - see corresponding operation.

Transmission and clutch - see operations in group K.
.P. T3308.tif	9	7,5	tiff;;
.D. ICON09.tif	0,75	0,75	tiff;; Tighten (Torque)

Flywheel bolts - 20 Nm + 115 degrees.

.D. ICON02.tif	0,75	0,75	tiff;; Install, Connect
Starter - see corresponding operation.
.P. T3209.tif	9	7,5	tiff;;

Rear Crankshaft Radial Seal Ring Replace Opel Arena I