Check Cylinder Head Flatness Opel Agila A

Remove

1. 1. Detach attaching pints from cylinder head
2. 2. Clean sealing surface and remove gasket residue
3. 3. Check cylinder head for deflection along its length and width and distortion along the diagonal using a straightedge and feeler gauge at the sealing surfaces. • Use a straightedge and feeler gauge • Maximum sag 0.10 mm
4. 4. Measure cylinder head height • Sealing surface to sealing surface • Measurement I: = 105.45 – 105.55 mm

Install

5. 5. Attach cylinder head attaching parts