Specifications
| Item | Specifications | |
|---|---|---|
| Transmission type | A6LF2 | |
| Engine model | Gasoline 2.0 T-GDI | |
| Torque converter type | 3-element, 1-stage, 2-phase type | |
| Torque converter size | Ø236 mm (9.2913 in.) | |
| Oil pump system | Parachoid | |
| Friction elements | Clutch: 2EA | |
| Brake: 3 EA | ||
| OWC : 1 EA | ||
| Planetary gear | 3 EA | |
| Gear ratio | 1st | 4.651 |
| 2nd | 2.831 | |
| 3rd | 1.842 | |
| 4th | 1.386 | |
| 5th | 1.000 | |
| 6th | 0.772 | |
| Reverse | 3.393 | |
| Final gear ratio | 2.885 | |
| Fluid pressure balance piston | 2EA | |
| Accumulator | 4 EA | |
| Solenoid valve | 8 EA (VFS:6EA, ON/OFF:2EA) | |
| Shift lever position | 4 Range (P, R, N, D) | |
| Oil filter | 1 EA | |
| VFS: Variable Force Solenoid | ||
ITEM SPECIFICATION CHART
Tightening Torques
| Item | N.m | Kgf.m | Lb-ft |
|---|---|---|---|
| TCM installation mounting bolt | 9.8~11.8 | 1.0~1.2 | 7.2~8.7 |
| Shift cable bracket mounting bolt | 14.7~21.6 | 1.5~2.2 | 10.8~15.9 |
| Input shaft speed sensor mounting bolt | 9.8~11.8 | 1.0~1.2 | 7.2~8.7 |
| Output shaft speed sensor mounting bolt | 9.8~11.8 | 1.0~1.2 | 7.2~8.7 |
| Shift lever assembly bolt | 9.8~14.7 | 1.0~1.5 | 7.2~10.8 |
| Inhibitor switch mounting bolt | 9.8~11.8 | 1.0~1.2 | 7.2~8.7 |
| Valve body cover mounting bolt | 13.8~14.7 | 1.3~1.5 | 9.4~10.8 |
| Eyebolt | 34.3~44.1 | 3.5~4.5 | 25.3~32.6 |
| Oil drain plug | 34.3~44.1 | 3.5~4.5 | 25.3~32.6 |
| Oil level plug | 34.3~44.1 | 3.5~4.5 | 25.3~32.6 |
| Torque converter mounting bolt | 45.1~52.0 | 4.6~5.3 | 33.3~38.3 |
| Starter motor mounting bolts | 42.2~53.9 | 4.3~5.5 | 31.1~39.8 |
| Automatic transaxle upper mounting bolt (TM=>Eng) | 42.2~53.9 | 4.3~5.5 | 31.1~39.8 |
| Automatic transaxle lower mounting bolt (Eng=>TM) | 42.2~48.1 | 4.3~4.9 | 31.1~35.4 |
| 42.2~53.9 | 4.3~5.5 | 31.1~39..8 | |
| Automatic transaxle support bracket bolt | 88.3~107.9 | 9.0~11.0 | 65.1~79.6 |
TIGHTENING TORQUES SPECIFICATION CHART