Home ReviewsRefund
Home/Volvo/XC90/Volvo XC90 I (2002-2006)/Repair manual/Testing & Diagnostics/Engine Control Module (ECM) Diagnostic Trouble Codes - 10 o…
Contents Wiring diagrams Section: Testing & Diagnostics All sections

Engine Control Module (ECM) Diagnostic Trouble Codes - 10 of 13: Maintenance Volvo XC90 I

Testing & Diagnostics ~343 words

RESET ADAPTATIONS

  1. Turn off the engine.
  2. Ignition on Reset adaptations to zero using the VCT2000 (or appropriate scan tool). This is done to give the system a normal starting point. Thus it can be seen faster if the adaptations run off up or down.
  1. Continue Refer to «START ADAPTATIONS»(ref-476781-S31588864052012060500000)
  1. Turn off the engine.
  2. Ignition on Reset adaptations to zero using the VCT2000 (or appropriate scan tool). This is done to give the system a normal starting point. Thus it can be seen faster if the adaptations run off up or down.
  1. Continue Refer to «START ADAPTATIONS»(ref-476781-S07618863972012060500000)
  1. Turn off the engine.
  2. Ignition on Reset adaptations to zero using the VCT2000 (or appropriate scan tool). This is done to give the system a normal starting point. Thus it can be seen faster if the adaptations run off up or down.
  1. Continue Refer to «START ADAPTATIONS»(ref-476781-S34811983332012060500000)
  1. Turn off the engine.
  2. Ignition on Reset adaptations to zero using the VCT2000 (or appropriate scan tool). This is done to give the system a normal starting point. Thus it can be seen faster if the adaptations run off up or down.
  1. Continue Refer to «START ADAPTATIONS»(ref-476781-S29228516362012060500000)
  1. Turn off the engine.
  2. Ignition on Reset adaptations to zero using the VCT2000 (or appropriate scan tool). This is done to give the system a normal starting point. Thus it can be seen faster if the adaptations run off up or down.
  1. Continue Refer to «START ADAPTATIONS»(ref-476781-S29413414482012060500000)
  1. Turn off the engine.
  2. Ignition on Reset adaptations to zero using the VCT2000 (or appropriate scan tool). This is done to give the system a normal starting point. Thus it can be seen faster if the adaptations run off up or down.
  1. Continue Refer to «START ADAPTATIONS»(ref-476781-S00907521102012060500000)
  1. Turn off the engine.
  2. Ignition on Reset adaptations to zero using the VCT2000 (or appropriate scan tool). This is done to give the system a normal starting point. Thus it can be seen faster if the adaptations run off up or down.
  1. Continue Refer to «START ADAPTATIONS»(ref-476781-S29328683832012060500000)

More articles — Engine Control Module (ECM) Diagnostic Trouble Codes - 10 of 13