Home ReviewsRefund Car not listed?
Home/Volvo/C70/Volvo C70 I (1997-2005)/Repair manual/Engine Control Systems/Engine with Mountings and Equipment- Engine Control (Conver…
Contents Wiring diagrams Section: Engine Control Systems All sections

Engine with Mountings and Equipment- Engine Control (Convertible): Overhaul Volvo C70 I

Engine Control Systems 2 illustrations ~146 words

Assembly

  1. Insert odometer in baseplate.

Scheme 95

Scheme 95
Scheme 95
  1. Assemble instrument panel and baseplate.
  2. Make sure that reset button is in right place in instrument panel and that instrument panel fits correctly onto baseplate. Press together.
  3. Make sure to run the odometer lead and connector through the square hole.

Scheme 96

Scheme 96
Scheme 96
  1. Assemble instrument casing.
  2. Insert baseplate and instrument panel in place and screw in the 9 screws.
  1. Assemble instrument panel and baseplate.
  2. Make sure that reset button is in right place in instrument panel and that instrument panel fits correctly onto baseplate. Press together.
  3. Make sure to run the odometer lead and connector through the square hole.
  1. Assemble instrument casing.
  2. Insert baseplate and instrument panel in place and screw in the 9 screws.
  1. Assemble instrument casing.
  2. Insert baseplate and instrument panel in place and screw in the 9 screws.

More articles — Engine with Mountings and Equipment- Engine Control (Convertible)