Installing the leak diagnostic pump
Install
- the connector
- the two hoses
- the three screws. NOTE: Use new hose clamps.
Pump leak diagnostic, replacing
Note. As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential information in the illustrations is always correct.
Removing the leak diagnostic pump
Remove the 3 screws.
Remove
- the connector
- the 2 hoses.
Install
- the connector
- the 2 hoses
- the 3 screws.
See also:
• 9812270
• Safety regulations for handling fuel