Manual sections

Wiring diagrams

• Abbreviations
• Accessory Drive Belts
• Airbag
• Alarm, Convertible, Doors, Locks, Mirror - Removal, Replacement and Installation (Convertible)
• Antenna Systems
• Anti-Lock/traction Control
• Anti-Theft, Locks, Steering Column - Removal & Installation (Convertible)
• Application
• Automatic HVAC System
• Automatic Trans
• Auxiliary Emission Control Systems
• Axle Shaft, Gear Selector Shaft, Input Shaft - Removal & Installation (Convertible)
• Axle Shafts
• Basic Trouble Shooting
• Blowers, Superchargers & Turbochargers
• Body Electrical
• Brakes
• Cabin Air Filter
• Charging System
• Check Lists
• Climate Units - Removal, Replacement and Installation (Convertible)
• Climate Units - Removal, Replacement and Installation (Coupe)
• Climate Units - Symptom Related Diagnostic Procedures (Coupe)
• Clutches Manual & Hydraulic
• Computer Relearn
• Cooling Fan
• Cooling System (Mechanical)
• Cruise Control Systems
• Diagnostic Connector Locations
• Differentials & Drive Axles
• Door Locks & Anti-Theft Systems
• Door, Interior Panels, Frams, Seats - Adjustment, Removal & Installation (Coupe)
• Doors and Lids - Removal, Replacement and Installation (Coupe)
• Drive Cycles
• Driveline/axles
• DTC Index
• Electrical Component Locations
• Emission Applications
• Engine
• Engine - Removal, Replacement and Installation (Convertible)
• Engine - Removal, Replacement and Installation (Coupe)
• Engine Control Systems
• Engine Performance
• Entertainment Systems
• Exterior Body Panels
• Exterior Lights
• Exterior/interior Trim
• Frames, Subframes & Crossmembers
• Fuel System
• Fuses & Circuit Breakers
• Gauges & Instrument Panels
• General Servicing - All Makes
• Headlights
• Heater
• Identification
• Ignition Switch/steering Lock
• Ignition System
• Interior Trim, Restraints, Steering Column Cover - Removal, Replacement and Installation (Coupe)
• Interior Trim, Seats - Removal, Replacement and Installation (Convertible)
• Lubrication System
• Manual & Power Steering
• Manual HVAC System
• Manual Trans
• Mechanical
• Mechanical - Hydraulic
• Metric Conversions
• Mirrors
• Navigation System
• Oem General Information
• Paint/coatings
• Parking Brake System
• Passive Restraints
• Procedures
• Removal & Installation
• Reset Procedures
• Restraint System - Removal, Replacement and Installation (Convertible)
• Restraints
• Seats
• Seats - Removal, Replacement and Installation (Coupe)
• Specifications
• Starter
• Steering
• Steering Column
• Steering Column Switches
• Sun Roof/t-Top/convertible Top
• Suspension Front
• Suspension Rear
• Testing & Diagnostics
• Theory & Operation
• Timing Belt
• Towing Systems
• Traction Control Disable
• Transmission
• Transmission - Adaptation (Coupe)
• Transmission - Clutch, Lubrication, Gear-Shift Position (Coupe)
• Transmission - Fluid Specifications, Removal & Installation (Coupe)
• Transmission - Lubrication & Transmission (Convertible)
• Transmission - Removal, Replacement and Installation (Convertible)
• Transmission - Removal, Replacement and Installation (Coupe)
• Wheel & Tire System
• Wheel Alignment
• Wheel Hubs
• Windows
• Wiring - General Information (Convertible)
• Wiring - General Information (Coupe)
• Wiring Diagrams - Engine Performance

Repair manual

Engine - Removal, Replacement and Installation (Convertible) Volvo C70 I

Step-by-step instructions on "Engine - Removal, Replacement and Installation (Convertible)" for Volvo C70 I (1997–2005). Pick an article — removal, installation, adjustment and diagnostics with illustrations.

166subsections

166articles

197illustrations

Adjusting the mechanical belt tensioner

1 article

• Adjusting the mechanical belt tensioner

Engine, Lifting Out/In

1 article

• Engine, Lifting Out/In 22

Camshaft seal/variable valve timing (VVT) unit, replacing

1 article

• Camshaft seal/variable valve timing (VVT) unit, replacing 7

Checking and adjusting the variable valve timing unit

1 article

• Checking and adjusting the variable valve timing unit

Installing components

1 article

• Installing components

Checking the engine

1 article

• Checking the engine

Replacing the rear seal

1 article

• Replacing the rear seal 1

Replacing the variable valve timing (VVT) control valve

1 article

• Replacing the variable valve timing (VVT) control valve 2

Installing the variable valve timing (VVT) control valve

1 article

• Installing the variable valve timing (VVT) control valve

Install Spark Plugs & Ignition Coils

1 article

• Install Spark Plugs & Ignition Coils 1

How is the cylinder checked for leakage?

1 article

• How is the cylinder checked for leakage?

Fault-tracing

1 article

• Fault-tracing

Check

1 article

• Check

Other information

1 article

• Other information

Replacing spark plugs

1 article

• Replacing spark plugs

Removing spark plugs

1 article

• Removing spark plugs 2

Checking work

1 article

• Checking work

Replacing the flywheel

1 article

• Replacing the flywheel

Petrol engines

1 article

• Petrol engines

Diesel engines

1 article

• Diesel engines

Replacing the flywheel (Petrol)

1 article

• Replacing the flywheel (Petrol)

Preparatory work

1 article

• Preparatory work 3

Finishing

1 article

• Finishing

Replacing the flywheel (Diesel)

1 article

• Replacing the flywheel (Diesel) 2

Installing the flywheel

1 article

• Installing the flywheel

Removing the transmission

1 article

• Removing the transmission 10

Installing the transmission

1 article

• Installing the transmission 7

Installing the collision protection system over the steering gear (right-hand drive cars)

1 article

• Installing the collision protection system over the steering gear (right-hand drive cars)

Lifting the engine and gearbox to the horizontal position

1 article

• Lifting the engine and gearbox to the horizontal position 2

Installing the subframe on the bodywork

1 article

• Installing the subframe on the bodywork

Installing the sealing ring for the CV joint housing

1 article

• Installing the sealing ring for the CV joint housing

Installing the left drive shaft on the gearbox, stub axle and control arm

1 article

• Installing the left drive shaft on the gearbox, stub axle and control arm

Installing the screws for the front engine pad

1 article

• Installing the screws for the front engine pad 3

Installing the right drive shaft on the gearbox, stub axle and control arm

1 article

• Installing the right drive shaft on the gearbox, stub axle and control arm

Installing new lock nuts on the steering gear

1 article

• Installing new lock nuts on the steering gear

Lowering the car and removing the lifting beam and lifting tools from the engine

1 article

• Lowering the car and removing the lifting beam and lifting tools from the engine

Pressure plate/clutch driven plate, replacing

1 article

• Pressure plate/clutch driven plate, replacing 7

Gearbox, removing

1 article

• Gearbox, removing

Disconnecting the battery lead

1 article

• Disconnecting the battery lead

Removing engine compartment components

1 article

• Removing engine compartment components 1

Continue removing engine compartment components

1 article

• Continue removing engine compartment components

Plugging the hose as far as the clutch master cylinder

1 article

• Plugging the hose as far as the clutch master cylinder

Removing the mounting screws for the gearbox and starter motor

1 article

• Removing the mounting screws for the gearbox and starter motor

Removing the coolant hose from the heater unit

1 article

• Removing the coolant hose from the heater unit 3

Removing the air baffle and splash guard under the engine

1 article

• Removing the air baffle and splash guard under the engine

Removing the screw for the cable conduit

1 article

• Removing the screw for the cable conduit 2

Removing the charge air pipe

1 article

• Removing the charge air pipe

Removing the control arms and track rod (both sides)

1 article

• Removing the control arms and track rod (both sides)

Removing the nut from the ball joint (both sides)

1 article

• Removing the nut from the ball joint (both sides)

Removing the screws from the sub-frame support plates (both sides)

1 article

• Removing the screws from the sub-frame support plates (both sides)

Removing the stub axle from the control arm

1 article

• Removing the stub axle from the control arm

Removing the drive shaft from the stub axle (right-hand side)

1 article

• Removing the drive shaft from the stub axle (right-hand side)

Removing the sealing ring for the CV joint housing

1 article

• Removing the sealing ring for the CV joint housing

Removing the cap for the drive shaft support bearing

1 article

• Removing the cap for the drive shaft support bearing

Removing the drive shaft

1 article

• Removing the drive shaft

Pressing up the sub-frame on the right-hand side

1 article

• Pressing up the sub-frame on the right-hand side

Removing the screw from the starter motor and the exhaust pipe from the turbocharger (TC)

1 article

• Removing the screw from the starter motor and the exhaust pipe from the turbocharger (TC)

Removing the front cross member

1 article

• Removing the front cross member

Removing the screw for the rear engine pad

1 article

• Removing the screw for the rear engine pad

Removing the rear engine mounting

1 article

• Removing the rear engine mounting

Removing the screw and clamp from the gearbox and engine

1 article

• Removing the screw and clamp from the gearbox and engine

Preparatory work for removing the stub axle on the left-hand side

1 article

• Preparatory work for removing the stub axle on the left-hand side 1

Lowering the sub-frame

1 article

• Lowering the sub-frame

Lowering the engine and gearbox

1 article

• Lowering the engine and gearbox

Removing the collision protection system over the steering gear

1 article

• Removing the collision protection system over the steering gear

Installing the fixture on the mobile jack

1 article

• Installing the fixture on the mobile jack

Removing the gearbox

1 article

• Removing the gearbox

Cylinder head/gasket, replacing

1 article

• Cylinder head/gasket, replacing 3

Setting up the engine

1 article

• Setting up the engine 8

When replacing or working on the cylinder head

1 article

• When replacing or working on the cylinder head 1

Variable valve timing unit, checking and adjusting

1 article

• Variable valve timing unit, checking and adjusting 5

Preparation

1 article

• Preparation

Removing components

1 article

• Removing components

Depressurizing the fuel system

1 article

• Depressurizing the fuel system 1

Removing ignition coils

1 article

• Removing ignition coils

Removing intake manifold

1 article

• Removing intake manifold

Removing the timing belt

1 article

• Removing the timing belt

Removing the timing gear pulley

1 article

• Removing the timing gear pulley

Removing components from turbocharger (TC)

1 article

• Removing components from turbocharger (TC)

Releasing the inlet pipe for the coolant pump

1 article

• Releasing the inlet pipe for the coolant pump

Removing the camshaft cover and cylinder head

1 article

• Removing the camshaft cover and cylinder head

Cleaning

1 article

• Cleaning

Installing the cylinder head

1 article

• Installing the cylinder head

Installing valve lifters and camshafts

1 article

• Installing valve lifters and camshafts

Applying liquid gasket

1 article

• Applying liquid gasket

Installing the camshaft cover

1 article

• Installing the camshaft cover

Installing the manifold and turbocharger (TC)

1 article

• Installing the manifold and turbocharger (TC)

Installing the rear camshaft seal

1 article

• Installing the rear camshaft seal

Installing the front camshaft seals

1 article

• Installing the front camshaft seals

Installing intake manifold

1 article

• Installing intake manifold

Installing the fuel rail

1 article

• Installing the fuel rail

Fuel line, lock

1 article

• Fuel line, lock 1

Engines with EGR systems

1 article

• Engines with EGR systems 3

Reinstall

1 article

• Reinstall 2

Lifting out the engine and transmission

1 article

• Lifting out the engine and transmission 3

Reinstalling the engine and transmission

1 article

• Reinstalling the engine and transmission

New routing of auxiliaries belt

1 article

• New routing of auxiliaries belt 1

Removing the oil sump

1 article

• Removing the oil sump 2

The following applies to turbocharged engines

1 article

• The following applies to turbocharged engines 3

The following applies to all cars with diesel engines

1 article

• The following applies to all cars with diesel engines

Preparations

1 article

• Preparations 1

Lift of the camshaft belt

1 article

• Lift of the camshaft belt

Tighten timing belt

1 article

• Tighten timing belt 3

Replacing camshafts seal

1 article

• Replacing camshafts seal 12

Set the engine according to the marking

1 article

• Set the engine according to the marking

Secure the crankshaft position

1 article

• Secure the crankshaft position 5

Install the timing belt pulley. Applies to aspiration engine.

1 article

• Install the timing belt pulley. Applies to aspiration engine. 1

Tighten the timing belt

1 article

• Tighten the timing belt

Install the rear camshaft seal.

1 article

• Install the rear camshaft seal. 1

Install and fill

1 article

• Install and fill 3

Clean

1 article

• Clean 1

Install the lower cylinder head half

1 article

• Install the lower cylinder head half 1

Install the upper cylinder head half

1 article

• Install the upper cylinder head half 2

Install the timing belt

1 article

• Install the timing belt 3

Position the crankshaft according to the marking

1 article

• Position the crankshaft according to the marking

Apply liquid gasket

1 article

• Apply liquid gasket

Install the camshaft seals, front

1 article

• Install the camshaft seals, front

Install the camshaft pulleys

1 article

• Install the camshaft pulleys

Tighten the camshaft pulleys

1 article

• Tighten the camshaft pulleys

Check the markings

1 article

• Check the markings

Top up coolant/Change oil and oil filter

1 article

• Top up coolant/Change oil and oil filter

Modification of crankcase ventilation with new cylinder head/engine

1 article

• Modification of crankcase ventilation with new cylinder head/engine 1

Auxiliaries belt/belt tensioner, replacing

1 article

• Auxiliaries belt/belt tensioner, replacing 1

Replacing the belt tensioner

1 article

• Replacing the belt tensioner

Installing the auxiliaries belt

1 article

• Installing the auxiliaries belt

Replacing the camshaft seals/variable valve timing (VVT) unit

1 article

• Replacing the camshaft seals/variable valve timing (VVT) unit

Removing the camshaft seal

1 article

• Removing the camshaft seal

Position the engine according to the marking

1 article

• Position the engine according to the marking

Removing the camshaft belt

1 article

• Removing the camshaft belt

Removing the timing gear pulley with the variable valve timing (VVT) unit

1 article

• Removing the timing gear pulley with the variable valve timing (VVT) unit 1

Installing the timing belt

1 article

• Installing the timing belt

Checking the markings and belt tension

1 article

• Checking the markings and belt tension

Replacing the rear camshaft seal

1 article

• Replacing the rear camshaft seal

Replacing the engine pad

1 article

• Replacing the engine pad

Install the new engine pad

1 article

• Install the new engine pad 8

Install the flame trap

1 article

• Install the flame trap

Intake manifold/gasket, replacing

1 article

• Intake manifold/gasket, replacing 2

Transferring components when replacing the intake manifold

1 article

• Transferring components when replacing the intake manifold 1

Installing the intake manifold and gasket

1 article

• Installing the intake manifold and gasket

Final check

1 article

• Final check

Oil/oil filter, replacing.

1 article

• Oil/oil filter, replacing. 3

Install the new filter

1 article

• Install the new filter

Fill engine oil

1 article

• Fill engine oil

Checking performed work

1 article

• Checking performed work

Replacing the oil cooler

1 article

• Replacing the oil cooler 1

Installing the oil cooler

1 article

• Installing the oil cooler 1

Crankshaft seal rear, replacing

1 article

• Crankshaft seal rear, replacing

Removing the flywheel and carrier plate

1 article

• Removing the flywheel and carrier plate 2

Installing the sealing ring

1 article

• Installing the sealing ring 1

Installing flywheel and carrier plate

1 article

• Installing flywheel and carrier plate

Installing the gearbox

1 article

• Installing the gearbox

Three-way catalytic converter (TWC), replacing

1 article

• Three-way catalytic converter (TWC), replacing 2

Installing the three-way catalytic converter (TWC)

1 article

• Installing the three-way catalytic converter (TWC) 1

Replacing the timing belt/idler pulley/belt tensioner

1 article

• Replacing the timing belt/idler pulley/belt tensioner 2

Installing the camshaft belt

1 article

• Installing the camshaft belt

Loosen turbocharger

1 article

• Loosen turbocharger 6

Replacing timing belt

1 article

• Replacing timing belt

Position camshafts/crankshaft according to marking

1 article

• Position camshafts/crankshaft according to marking 5

Install the new timing belt

1 article

• Install the new timing belt

Installing camshaft pulley and timing belt

1 article

• Installing camshaft pulley and timing belt

Turn engine crankshaft two turns

1 article

• Turn engine crankshaft two turns

Checking belt tensioner and idler roller

1 article

• Checking belt tensioner and idler roller

Install components

1 article

• Install components

Replacing valve stem seal

1 article

• Replacing valve stem seal 1

Lifting engine

1 article

• Lifting engine 16

Top up coolant and engine oil

1 article

• Top up coolant and engine oil