Fuel system, draining
To drain the fuel from the system, see Draining the fuel system
Draining the tank
If the fuel tank is more than half full, drain the fuel tank. See Draining the fuel tank
Draining fuel tank
Drain the fuel from the fuel tank. See Draining the fuel tank .
Drain the fuel tank. See Draining the fuel tank .
Scheme 306
Remove the cover over the fuel level sensor.
Disconnect the connector.
Remove the snap ring for the level sensor using special tool 9995720 .
Pull the level sensor up. This is easier if the fuel lines are bent upwards through the hole.
Disconnect the 2 connectors from the level sensor.
Remove the ejector. Press down the catch.
Remove the level sensor.