Piston
| Engine | C 25 XE | ||
|---|---|---|---|
| Material | Aluminium, cast | ||
| Type and surface treatment | graphited | ||
| Piston clearance | In short blocks and cylinder blocks with complete pistons, the piston clearance is: | ||
| 0.023 to 0.037 mm (without graphite layer) | |||
| In rebuilding (oversize),depending upon the piston available a clearance of 0.02 to 0.04 mm permissible (without graphite layer) | |||
| Identification: 1-Engine type, 2-Coefficient, | |||
| 3-Installation direction | |||
| .P. E3611.tif | 9 | 7,5 | tiff;; |