Cylinder Bore
| Engine | C 25 XE |
|---|---|
| Reboring cylinder | |
| Permissible oversize mm | up to 0.5 (see parts microfiche) |
| After reboring the cylinders, destroy the original index on the crankcase and stamp in the new oversize index. | |
| Bore | |
| Permissible out-of-round mm | 0.0065 1) |
| Permissible taper mm | |
| 1) Measure out-of-round at four different heights in bore | |
| Piston project. above | |
| upper edge of cyl. block mm | 1.4 |