Compression, Check
Engine at operating temperature
(oil temperature ³ 80 °C/176 °F)
| .D. ICON01.tif | 0,75 | 0,75 | tiff;; Remove, Disconnect |
Remove front right footwell cover and remove fuel pump relay (1) from base.
Remove all spark plugs - see operation
"Spark Plugs, Replace".
| .P. E0703.tif | 9 | 7,5 | tiff;; |
|---|---|---|---|
| .D. ICON06.tif | 0,75 | 0,75 | tiff;; Inspect |
Note:
Use compression recorder with rubber cone and measuring range up to 1750 kPa (17.5 bar).
Actuate starter for approx. 4 seconds with throttle valve fully open - min. engine speed 300 rpm.
The pressure difference between the individual cylinders must not exceed 100 kPa (1 bar).
| .P. F1714.tif | 9 | 7,5 | tiff;; |
|---|---|---|---|
| .D. ICON02.tif | 0,75 | 0,75 | tiff;; Install, Connect |
Install all spark plugs - see operation "Spark Plugs, Replace".
| .D. ICON02.tif | 0,75 | 0,75 | tiff;; Install, Connect |
Insert fuel pump relay (1) in base.
Install front right footwell panelling.
| .P. E0703.tif | 9 | 7,5 | tiff;; |