Engine Damping Blocks, Engine, Short-block
Recommended Torque Values
Nm
AC compressor to support of auxiliary aggregates 35
Bracket to AC compressor 20
Bracket to support of auxiliary aggregates or to cylinder block 35
Bracket, alternator to cylinder block 35
Bracket, engine mount to cylinder block 60
Bracket, intermediate shaft to cylinder block 55
Bracket, oil intake pipe to cylinder block 6 2)
Bracket, pump assembly to cylinder block 40
Bracket, transfer box to cylinder block 60
Brake servo vacuum line to intake manifold 20
Cable connection (terminal 30) to alternator 8
Cable connection (terminal 30) to starter 5
Cable connection (terminal 50) to starter 4.4
Cable connection (terminal 61) to alternator 3.5
Coolant pipe to cylinder block 20
Coolant pump to cylinder block 25
Cover to throttle valve manifold 5 1)
Crankshaft pulse pick-up in cylinder block 6
Engine bracket to cylinder block 60
Engine damping block to side member 65 3)
Flange, engine vent to cylinder block 25
Knock sensor to cylinder block 20
Oil cooler lines to adapter 30
Oil drain bolt to oil pan 55
Oil filter to oil pump 15
Oil intake pipe to oil pump 8 2)
Oil pan to cylinder block 15 2)
Oil pump to cylinder block 6
Power steering hydraulic pump to support of auxiliary aggregates 25
Rear toothed belt cover to oil pump 6
Ribbed V-belt tension roller to support of auxiliary aggregates 18
Shackle, power steering hydraulic pump to support of auxiliary aggregates 18
Starter to cylinder block 45
Support of auxiliary aggregates to cylinder block 35
Support to intake manifold and cylinder block 25
Support, starter to cylinder block 25
Toothed belt drive gear to crankshaft 250 + 40° to 50° 4)
Transmission to cylinder block 60
V-belt pulley to toothed belt drive gear 20
1) C 20 LET
2) Recut fastening bolts before reuse and insert with Locking Compound 15 10 177 (90 167 347)
Maximum assembly time including torque check is 10 min.
3) Recut thread and insert bolts with Locking Compound 15 10 177 (90 167 347)
4) Use new bolt(s)