Mass Air Flow Meter Replacement Opel Agila B

Remove

1. 1. Release air cleaner assembly (1) from cylinder head cover • Pull off to release 2x rubber locator
2. 2. Remove cover and air cleaner element from air cleaner assembly • Release 2x clip (2), 2x locator

3. 3. Disconnect harness connector from mass air flow (MAF) meter (1)

4. 4. Disconnect harness connector (1) from fuel tank evaporation solenoid valve, then release from 2x clip

5. 5. Release fuel tank evaporation solenoid valve (3) from air cleaner assembly (2) • Remove bolt • Move fuel tank evaporation solenoid valve with 2x hose to one side
6. 6. Release air intake hose from air cleaner assembly • Release clip (1)
7. 7. Remove air cleaner assembly from intake manifold • Remove bolt (4)

8. 8. Remove MAF meter (1) from air cleaner assembly (2) • Remove 2x screw

Install

9. 9. Install new seal ring to new MAF meter
10. 10. Install MAF meter (1) to air cleaner assembly (2) • Install 2x screw 1.2 Nm

11. 11. Install air cleaner assembly (2) to intake manifold • Install bolt (4)
12. 12. Connect air intake hose to air cleaner assembly • Secure clip (1)
13. 13. Secure fuel tank evaporation solenoid valve (3) with 2x hose to air cleaner assembly • Install bolt

14. 14. Connect harness connector (1) to fuel tank evaporation solenoid valve, then secure to 2x clip

15. 15. Connect harness connector to MAF meter (1)

16. 16. Install air cleaner element and cover to air cleaner assembly (1) • Secure cover to air cleaner assembly – Secure 2x locator, then secure 2x clip (2)
17. 17. Secure air cleaner assembly to cylinder head cover • Push on to secure 2x rubber locator