Home ReviewsRefund
Home/Opel/Agila/Opel Agila B (2008-2011)/Repair manual/Engine Control and Fuel System - K10B/Manifold Absolute Pressure Sensor Replacement
Contents Wiring diagrams Section: Engine Control and Fuel System - K10B All sections

Manifold Absolute Pressure Sensor Replacement Opel Agila B

Engine Control and Fuel System - K10B

Remove

  1. 1. Disconnect harness connector from manifold absolute pressure (MAP) sensor (1)
  2. 2. Remove MAP sensor from intake manifold • Remove bolt, then pull out

Install

  1. 3. Install new MAP sensor (1) to intake manifold • Install new O ring seal • Install bolt
  2. 4. Connect harness connector to MAP sensor

More articles — Engine