- On A4 and A6, move lock carrier into service position for access to serpentine belt. See «LOCK CARRIER»(ref-147486-S40535456302002091600000).
- Remove trim cover from top of engine. (Схема №21) Remove engine noise insulation shield from under engine. (Схема №8)
- Using Spanner Wrench (3212), hold viscous fan pulley. (Схема №26) Using Open End Wrench (3312), or equivalent, rotate viscous fan clockwise to remove.
- Using a wrench, rotate ribbed belt tensioner clockwise and install a drift to hold. Remove serpentine belt. (Схема №27)
Installation
- If reusing original serpentine belt, ensure belt is installed in original direction of rotation.
- Install viscous fan and tighten to specification. See «TORQUE SPECIFICATIONS»(ref-147486-S30794586192002091600000) .
- Install lock carrier to body. See «LOCK CARRIER»(ref-147486-S40535456302002091600000) .