Home ReviewsRefund
Home/Audi/A6/Audi A6 C5 (1997-2001)/Repair manual/Mechanical/Accelerator Pedal
Contents Wiring diagrams Section: Mechanical All sections

Accelerator Pedal Audi A6 C5

Mechanical
  1. Remove clip for accelerator pedal cable on throttle body. Depress and hold accelerator pedal to Wide Open Throttle (WOT) position.
  2. On manual transmission vehicles, reinstall clip for accelerator pedal cable. On automatic transmission vehicles, disconnect kickdown switch 2-pin harness connector. Using DVOM, ensure continuity exists between kickdown switch terminals in WOT position. On all models, release accelerator pedal. Adjustment is complete. After adjusting accelerator pedal, check Closed Throttle Position (CTP) switch and WOT stops.

More articles — 2.8L V6 30V (engine Code: Aha, Atq)