| Application | Specification | |
|---|---|---|
| Intake Valve | ||
| Face Angle | (1) 45° | |
| Installed Height | (2) | |
| Stem Diameter | .2346-.2350" (5.96-5.97 mm) | |
| Valve Guide Side Play (3) | .032" (.8 mm) | |
| Valve Length | 4.128-4.147" (104.84-105.34 mm) | |
| Exhaust Valve | ||
| Face Angle | (1) 45° | |
| Installed Height | (2) | |
| Stem Diameter | .2339-.2343" (5.94-5.95 mm) | |
| Valve Guide Side Play (3) | .032" (.8 mm) | |
| Valve Length | 4.080-4.100" (103.64-104.14 mm) | |
| (1) Valves must not be refaced by grinding. Only hand lapping is allowed. (2) VALVE SEAT procedure gives information on valve installed height. See CYLINDER HEAD under OVERHAUL. (3) See CYLINDER HEAD under OVERHAUL for correct valve guide side play checking procedure. | ||
| (1) | Valves must not be refaced by grinding. Only hand lapping is allowed. |
| (2) | VALVE SEAT procedure gives information on valve installed height. See CYLINDER HEAD under OVERHAUL. |
| (3) | See CYLINDER HEAD under OVERHAUL for correct valve guide side play checking procedure. |
VALVES & VALVE GUIDES