Engine Checking and Adjusting Operations
Recommended Torque Values
Nm
Camshaft pulley to camshaft 75 + 60° + 5°1)
Clamping bracket to alternator and intake manifold 25
Oil pressure switch to oil pump 40
Sheathed glow plug to cylinder head 20
Toothed belt gear to hub of injection pump 25
Toothed belt tension roller to oil pump 25
Water pump to cylinder block 25
1) Use new bolt(s)
Note:
When torque angles are specified, tighten bolts to the relevant torque and then turn further by the indicated angle.