Crank Drive, Cylinder Block
Crankshaft
| Engine | 17 DT (TC 4 EE 1) |
|---|---|
| Crankshaft and con-rod bearing journals | |
| Permissible out-of-round mm | 0.0025 |
| Permissible taper mm | 0.0025 |
| Radial runout | Permissible deviation of centre crankshaft bearing journal when |
| crankshaft is mounted in cylinder block: | |
| mm | 0.00 to 0.06 |
| Permissible end play mm | 0.06 to 0.30 |
| Permissible main bearing play mm | 0.03 to 0.08 |
| Permissible con-rod bearing play mm | 0.025 to 0.100 |
| Permissible con-rod lateral play mm | 0.20 to 0.40 |