Oil Circuit
Engine Oil Viscosity
The following engine
oils can be used: A = Single grade oils
B = Multi-grade oils
C = Easy run oils
depending on the outside temperature, for both petrol and diesel engines.
| .P. C9563.tif | 9 | 7,5 | tiff;; |
Engine Oil Quality
It is important that the following API and CCMC classes be used:
| Engines | Single and multi-grade oils | Easy run oils |
|---|---|---|
| Normally aspirated | API SF/CD, API SG/CD, | API SF/CD, API SG/CD, |
| diesel/Turbodiesel | API CD, | CCMC-G5/PD2 |
| CCMC-PD2 |
Important!
CD oils designated by manufacturers specially for diesel engines are not suitable for petrol engines, unless a suitable performance class for petrol engines (e.g. API SF/CCMC-G4) is also indicated.
Disposal
Observe the relevant national regulations when disposing of used oil.
Engine Oil Filling Quantities
| Engine | Initial filling1) | Filling quantity | MIN to MAX |
|---|---|---|---|
| with filter change1) | |||
| (litres) | (litres) | (litres) | |
| 17 D, 17 DR | 5.1 | 5.0 | 1.0 |
1) Up to mark "MAX" on oil dipstick
Oil Pump
| Engine | 17 D, 17 DR |
|---|---|
| Oil pressure at idle speed and | |
| engine at operating temperature kPa (bar) | 150 (1.5) |
| (engine oil temperature ³ 80 °C) | |
| Tooth backlash mm | 0.175 to 0.225 |
| Recess of gears relative to housing mm | 0.03 to 0.10 |