Recommended Torque Values
| Nm |
|---|
| Cover plate to transmission housing | 7 |
| Starter to cylinder block, M10 | 40 |
| Starter to cylinder block, M12 | 75 |
| Intake manifold to cylinder head | 25 |
| Connection to turbocharger | 30 |
| Oil cooler thermostat connection to cylinder head | 30 |
| Exhaust manifold to cylinder head | 30 |
| Exhaust pipe to exhaust manifold/turbocharger connection | 70 |
| Safety tank to side member | 35 |
| Thermostat housing cover to thermostat housing | 30 |
| Seal ring casing to cylinder block | 10 |
| Injector nozzle in nozzle holder (assembly) | 45 |
| Injection line to injector nozzle or injection pump | 25 |
Recommended Torque Values
| Nm |
|---|
| Injection pump to injection pump bracket | 45 |
| Injection pump to cylinder block/flange | 25 |
| Injection pump drive gear to injection pump | 64 |
| Front plate to cylinder head/cylinder block | 10 |
| Guide joint to steering knuckle | 30 |
| Alternator to bracket | 50 |
| Alternator to mounting bracket | 25 |
| Alternator to shackle | 25 |
| Sheathed glow plug in cylinder head | 20 |
| Bracket, turbocharger connection, to cylinder block | 50 |
| Exhaust pipe bracket to cylinder block | 25 |
| Injection pump bracket to injection pump | 40 |
| Bracket to injection pump bracket | 20 |
Recommended Torque Values
| Nm |
|---|
| Bracket, injector nozzle, to cylinder head | 50 |
| Injection pump bracket to cylinder block | 45 |
| Alternator bracket to cylinder block | 50 |
| Radiator bracket to air deflector panel | 6 |
| Bracket, engine mount, rear, to damping block | 65 |
| Bracket, rear engine mount to transmission | 90 |
| Bracket, engine mount, rear, to underbody | 65 |
| Bracket, engine mount, right, to engine damping block | 60 |
| Bracket, engine mount, right, to cylinder block | 45 |
| Tension strut bracket to crossmember | 50 + 90� +15� |
| Heat shield to exhaust manifold | 10 |
| V-belt pulley to coolant pump | 20 |
Recommended Torque Values
| Nm |
|---|
| V-belt tension new/run in | 450/250 - 300 |
| Fuel return line to injector nozzle holder | 30 |
| Crankshaft bearing cap to cylinder block | 88 |
| Crankshaft pulley to crankshaft | 20 |
| Coolant pump to cylinder block | 24 |
| Charge air pipe to intake manifold | 20 |
| Control arm to body | 60 |
| Fan shroud to radiator | 4 |
| Fan motor to fan shroud | 4 |
| Engine mount, left, to transmission | 60 |
| Engine mount, left, to engine damping block | 60 |
| Engine damping block, rear, to underbody | 65 |
Recommended Torque Values
| Nm |
|---|
| Left engine damping block to side member | 65 |
| Engine damping block, right, to side member | 65 |
| Rear engine bracket to engine damping block | 60 |
| Camshaft bearing caps to cylinder head | 25 |
| Camshaft pulley to camshaft | 14 |
| Oil drain plug to oil pan | 78 |
| Oil pressure regulating valve to cylinder block | 35 |
| Oil pressure switch in cylinder block | 20 |
| Oil filter to cylinder block | 15 |
| Oil cooler to cylinder block (hollow bolt) | 30 |
| Oil cooler to cylinder block (M 10) | 30 |
| Oil line to vacuum pump | 25 |
| Oil pressure line to cylinder block | 15 |
Recommended Torque Values
| Nm |
|---|
| Oil pump cover to cylinder block | 10 |
| Oil intake pipe to cylinder block | 19 |
| Oil baffle to cylinder block | 26 |
| Oil pan to cylinder block | 10 |
| Con-rod bearing cap to con-rod: | 25 + 100� +15� |
| Power steering pump to bracket | 27 |
| Crossmember to front frame | 60 |
| Wheel to wheel hub | 110 |
| Pulley to crankshaft toothed belt gear | 20 |
| Flywheel to crankshaft | 30 + 45 - 60 |
| Toothed belt tension roller | 19 |
| Temperature sensor in thermostat housing | 10 |
Recommended Torque Values
| Nm |
|---|
| Temperature switch in thermostat housing | 8 |
| Thermostat housing to cylinder head | 30 |
| Thermostat switch to radiator | 20 |
| Turbocharger to exhaust manifold | 22 - 31 |
| Toothed belt guide roller to cylinder block | 80 |
| Vacuum line to toothed belt panelling | 10 |
| Safety valve to cylinder block | 35 |
| Charge air safety valve to intake manifold | 50 |
| Union nut to nozzle holder | 50 |
| Vacuum pump to alternator | 7 |
| Vacuum pipe to vacuum pump | 18 |
| Closure bolt in distributor injection pump | 20 |
| Front exhaust pipe to exhaust manifold | 75 |
Recommended Torque Values
| Nm |
|---|
| Toothed belt gear to oil pump | 50 |
| Toothed belt gear to crankshaft | 133 - 161 |
| Toothed belt gear to injection pump | 64 |
| Toothed belt panelling to front plate | 10 |
| Toothed belt panelling to cylinder block | 10 |
| Tension strut to crossmember bracket | 90 |
| Tension strut with guide joint to lower control arm | 100 |
| Cylinder head to cylinder block | 40 + 60� - 75� + 60� - 75� |
| Cylinder head cover to cylinder head | 10 |
