Crank Drive
Crankshaft
| Engine | 15 D (4EC1), 15 DT, X 15 DT (T4EC1), 17 D, X 17 D (4EE1) | |
|---|---|---|
| Crankshaft and con-rod bearing journals | ||
| Permissible out-of-round | mm | 0.025 |
| Permissible taper | mm | 0.025 |
| Radial runout | mm | Permissible difference of central crankshaft bearing journal on installation of crankshaft in cylinder block: 0.00 to 0.06 |
| Permissible axial play | mm | 0.06 to 0.30 |
| Permissible main bearing play | mm | 0.03 to 0.08 |
| Permissible con-rod bearing play | mm | 0.025 to 0.100 |
| Permissible con-rod lateral play | mm | 0.20 to 0.40 |