Crank Drive
Cylinder Bore
| Engine | 17 D, X 17 D (4EE1) | |
|---|---|---|
| Rebore cylinder, reboring limit | Reboring of cylinders is technically not permitted. | |
| Bore | ||
| Permissible out-of-round | mm | 0.015 |
| Permissible taper | mm | 0.015 |
| Piston projection above upper edge of cylinder block | mm | 0.58 to 0.78 (see also cylinder head gasket) |
| Peak-to-valley height of sealing surface | mm | 0.01 |
| Peak-to-valley height of running surface | mm | max. 0.003 |