Specifications
| Item | Specifications | |
|---|---|---|
| Transmission type | A6MF1 | |
| Engine model | Gasoline 2.0 MPI | |
| Torque converter type | 3-element, 1-stage, 2-phase type | |
| Torque converter size | Ø236 mm (9.2913 in.) | |
| Oil pump system | Parachoid | |
| Friction elements | Clutch: 2EA | |
| Brake: 3EA | ||
| OWC: 1EA | ||
| Planetary gear | 3EA | |
| Gear ratio | 1st | 4.212 |
| 2nd | 2.637 | |
| 3rd | 1.800 | |
| 4th | 1.386 | |
| 5th | 1.000 | |
| 6th | 0.772 | |
| Reverse | 3.385 | |
| Final gear ratio | Tire (18 in.) | 3.510 |
| Except tire (18 in.) | 3.367 | |
| Fluid pressure balance piston | 2EA | |
| Accumulator | 4EA | |
| Solenoid valve | 8EA (VFS:6EA, ON/OFF:2EA) | |
| Shift lever position | 4 Range (P, R, N, D) | |
| Oil filter | 1EA | |
| VFS: Variable Force Solenoid | ||
Tightening Torques
| Item | N.m | Kgf.m | Lb-ft |
|---|---|---|---|
| TCM installation mounting bolt | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 |
| Shift cable bracket mounting bolt | 14.7 ~ 21.6 | 1.5 ~ 2.2 | 10.8 ~ 15.9 |
| Input shaft speed sensor mounting bolt | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 |
| Output shaft speed sensor mounting bolt | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 |
| Shift lever assembly bolt | 9.8~ 13.7 | 1.0 ~ 1.4 | 7.2 ~ 10.8 |
| Inhibitor switch mounting bolt | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 |
| Valve body cover mounting bolt | 13.7 ~ 15.7 | 1.4 ~ 1.6 | 10.8 ~ 11.6 |
| Eyebolt | 2.9 ~ 4.9 | 0.3 ~ 0.5 | 2.2 ~ 3.6 |
| Oil drain plug | 38.2 ~ 48.1 | 3.9 ~ 4.9 | 28.2 ~ 35.4 |
| Torque converter mounting bolt | 45.1 ~ 52.0 | 4.6 ~ 5.3 | 33.3 ~ 38.3 |
| Starter motor mounting bolt | 49.0 ~ 63.7 | 5.0 ~ 6.5 | 36.2 ~ 47.0 |
| Automatic transaxle upper mounting bolt (TM=>Eng) | 42.2 ~ 53.9 | 4.3 ~ 5.5 | 31.1 ~ 39.8 |
| Automatic transaxle lower mounting bolt (Eng=>TM) | 42.2 ~ 48.1 | 4.3 ~ 4.9 | 31.1 ~ 35.4 |
| 42.2 ~ 53.9 | 4.3 ~ 5.5 | 31.1 ~ 39.8 | |
| Automatic transaxle support bracket bolt | 88.3 ~ 107.9 | 9.0 ~ 11.0 | 65.1 ~ 79.6 |