Contents Wiring diagrams Section: Testing & Diagnostics All sections

DTC P1243: ANALOG GROUND MALFUNCTION Jaguar XJR II

  1. Turn ignition off. Disconnect ECM harness connector EM14. Check continuity between ECM harness connector EM14 terminal No. 4 (Black/Pink wire) and ground point G100 (on XJ Series), or G105 (on XK8). See WIRING DIAGRAMS article. (Схема №3) If continuity exists, go to next step. If continuity does not exist, repair open ground circuit and retest system.
  2. Disconnect ECM harness connector EM10. Measure resistance between ECM harness connector terminal No. 23 (Black/Pink wire) and ground point G100 (on XJ Series), or G105 (on XK8). If continuity exists, system is okay. If continuity does not exist, repair open ground circuit and retest system.