Throttle Body Installation Cadillac Escalade GMT800

Note. Refer to FASTENER NOTICE in Cautions and Notices.

Scheme 785

Scheme 786

1. Install the throttle body studs, if required. Tighten Tighten the throttle body studs to 6 N.m (53 lb in). Important: DO NOT use the throttle body gasket again. Install a NEW gasket during assembly.
2. Install the throttle body gasket (1) to the intake manifold.
3. Install the throttle body and nuts. Tighten Tighten the throttle body nuts to 10 N.m (89 lb in).
4. Install the engine coolant air bleed hose and clamp to the throttle body.