Engine Rear Cover Replacement Cadillac Escalade GMT800

Tools Required

J 41476 Front and Rear Cover Alignment-at crankshaft seal area

Scheme 239

Scheme 240

1. Remove the engine flywheel. Refer to «Engine Flywheel Replacement»(ref-180687-S10602655812005072800000) .
2. Remove the oil pan-to-rear cover bolts (1).
3. Remove the rear cover bolts.
4. Remove the rear cover and gasket.
5. Discard the rear cover gasket.
6. If required, clean and inspect the rear cover. Refer to «Engine Rear Cover Cleaning and Inspection»(ref-180687-S00834479252005072800000) .