Replace Telephone Console (Retrofit Kit) Opel Vectra C

Remove

1. 1. Remove telephone cradle in direction of arrow

2. 2. Release base holder • Unscrew bolt (1)

3. 3. Remove base holder • Release centre console – Unclip panel – Unscrew bolt (2) • Disconnect antenna cable (1)

4. 4. Detach positioning disk • Unscrew 2x bolt (1)

5. 5. Detach telephone console • Unscrew 2x bolt (1) • Remove telephone console

Install

6. 6. Attach telephone console • Tighten 2x bolts (1)
7. 7. Attach positioning disk • Tighten bolt (1) • Drill 2x holes (2) 2,5 mm • Tighten 2x screw

Note. Bolt (1) only fixes installation position.

8. 8. Unscrew bolt (1)

9. 9. Fasten base holder in position • Tighten bolt
10. 10. Insert mobile phone holder • Clip in telephone cradle