Home/Opel/Vectra/Opel Vectra C (2002-2008)/Repair manual/Communication / Navigation/Replace Digital Audio Broadcast (DAB) Receiver

Contents

Wiring diagrams Section: Communication / Navigation

All sections

Replace Digital Audio Broadcast (DAB) Receiver Opel Vectra C

Communication / Navigation 1 illustration

When replacing the control unit, before removing the control unit carry out a Reset with TECH 2.

Remove

1. Disconnect battery.
2. Remove glove compartment
3. Remove DAB receiver • Disconnect wiring harness plug (2) • Disconnect antenna cable (1) • Unhook 2x retaining lug (3) • Remove receiver to vehicle centre

Replace Digital Audio Broadcast (DAB) Receiver

Install

4. Install DAB receiver • Clip receiver into bracket • Connect wiring harness plug • Connect antenna cable
5. Fit glove compartment
6. Connect battery.
7. Program volatile memories When replacing the control unit, program control unit with TECH 2.