Replace Digital Audio Broadcast (DAB) Bracket Opel Vectra C

When replacing the control unit, before removing the control unit carry out a Reset with TECH 2.

Remove

1. 1. Disconnect battery.
2. 2. Remove glove compartment
3. 3. Remove DAB receiver • Disconnect wiring harness plug (2) • Disconnect antenna cable (1) • Unhook 2x retaining lug (3) • Remove receiver to vehicle centre
4. 4. Remove DAB bracket • Unscrew 2x nut (4)

Install

5. 5. Install DAB receiver bracket • Tighten 2x nut • Clip receiver into bracket • Connect wiring harness plug • Connect antenna cable
6. 6. Fit glove compartment
7. 7. Connect battery.
8. 8. Program volatile memories When replacing the control unit, program control unit with TECH 2.