Contents Section: Cih Petrol Engine All sections

Special Service Tools - Cih Engine Opel Senator B

Cih Petrol Engine ~198 words

Special Service Tools

KM - 135 Adapter for KM - 498 - B

To check engine oil pressure
.P. C7308.tif97,5tiff;;

KM - 139 - A Flywheel Locking Device (replaced by KM - 652)

To lock flywheel (transmission removed)
.P. A6605.tif97,5tiff;;

KM - 234 Remover/Installer (no longer available)

To remove and install camshaft bearing
.P. A2712.tif97,5tiff;;

KM-235-D Ring Installer

To install the bearing and seal ring in crankshaft
.P. B7868.tif97,5tiff;;

KM - 237 Clutch Guide Bolt

To centre the clutch disc
.P. A6613.tif97,5tiff;;

KM - 241 Reamer 0.075 mm oversize*

KM - 242 Reamer 0.300 mm oversize*

KM - 244 Reamer 0.150 mm oversize*

To ream the valve guide

*no longer available
.P. A6614.tif97,5tiff;;

KM - 252 - A Engine Lifter*

To remove and install engine
.P. C3514.tif97,5tiff;;

KM - 257 Valve Holder*

To hold the closed valve
.P. B7859.tif97,5tiff;;

KM - 263 - B Lifter/Holder

To lift or hold the engine

* no longer available
.P. A6623.tif97,5tiff;;

KM - 288 Spring Compressor

To replace the valve springs using KM - 257
.P. B7860.tif97,5tiff;;

KM - 289 Ring Installer

To install the seal ring in the timing gear case
.P. A6617.tif97,5tiff;;

MKM - 320 Splined Wrench

To remove and install the camshaft timing gear
.P. C9650.tif97,5tiff;;

KM - 328 - B Remover

To remove the crankshaft needle bearing
.P. A7927.tif97,5tiff;;

KM - 337 Remover/Installer

To remove and install the piston pin

(only 6 cyl.)
.P. A7614.tif97,5tiff;;

KM-340-C Cutter Set

To rework the valve seats
.P. A4597.tif97,5tiff;;

KM - 348 Spring Compressor

To compress the valve springs
.P. B3160.tif97,5tiff;;

KM-352 Installer

To install the valve stem seal
.P. D1165.tif97,5tiff;;

KM-412-4 Adapter

To mount engine in Stand KM-412
.P. B8050.tif97,5tiff;;

KM - 418 Drift (no longer available)

To install the oil dipstick guide pipe
.P. A7602.tif97,5tiff;;

KM-470-B Angular Torque Wrench

To tighten bolts/nuts by angular torque method
.P. D3258.tif97,5tiff;;

KM-498-B Pressure Gauge

To measure engine oil pressure with KM - 135
.P. D1069.tif97,5tiff;;

KM - 517 Locking Device

To lock the flywheel (engine installed)
.P. B2521.tif97,5tiff;;

MKM - 588 Pressure Gauge

To check fuel pressure
.P. C6082.tif97,5tiff;;

MKM - 596 Gauge

To measure oil temperature
.P. C1483.tif97,5tiff;;

MKM - 597 Removing Pliers

To remove valve shaft seals
.P. C2704.tif97,5tiff;;

MKM-604-B Torx Socket Wrench Set

To loosen/tighten inner/outer Torx bolts
.P. C2709.tif97,5tiff;;

KM - 609 Electronic Kit I

For diagnosis on electric and electronic systems
.P. C5793.tif97,5tiff;;

KM - 652 Flywheel Locking Device

To lock the flywheel (transmission removed)
.P. C7300.tif97,5tiff;;

Cooling System

KM - 471 Adapter

To check the cooling system under pressure (together with commercially available radiator tester)
.P. A9550.tif97,5tiff;;