MONTEREY MULTEC M Trouble code Table
Trouble
| code | Information sensor |
|---|---|
| Cause of Fault | Directions for Remedy in |
FO:DATA LIST
| No. | Trouble code storage when ... | Remarks | |
|---|---|---|---|
| 51 | REPLACE ECU | - | · Turn ignition ON |
· Engine OFF
If trouble code 51 has been detected, the following instructions should be followed:
Disconnect battery;
Connect battery again;
Delete trouble code and read trouble code again;
If trouble code 51 occurs again: replace control module;
The vehicle does not start when a fault is detected.