GMP4 6VD1 F5:ACTUATOR TEST
EVAP CONTROL V.
| Conditions for checking | Nominal Value |
Affected Terminals: A7
Possible Trouble Codes:
Engine running at idle speed, operating temperature
Press corresponding key in the system main menu to call up Actuator Test functions, select the desired test and confirm with YES. Follow the instructions in the diagnostic tester display.
The EVAP CONTROL V. is actuated at a frequency of 1 Hz.
| The check is completed after a maximum of 30 s. | EVAP CONTROL V. switched alternately: |
ACTIVE
INACTIVE
Hold
EVAP CONTROL V. in hand
or
Noise check:
| Quiet clicking noise |