MONTEREY MULTEC M Trouble code Table
Trouble
| code | Information sensor |
|---|---|
| Cause of Fault | Directions for Remedy in |
FO:DATA LIST
| No. | Trouble code storage when ... | Remarks |
|---|---|---|
| 33 | MAP SENSOR |
CIRCUIT
| 07 | · Engine speed greater than 1100 rpm |
· Throttle opening greater than 5 %
· Intake manifold absolute pressure less than 107 hPa
· The following trouble codes are not stored: 21
The above conditions must apply for at least 1 sec.
If trouble code 33 has been detected, the control module switches the engine control lamp on.
| 33 | MAP SENSOR |
CIRCUIT
| 07 | · Engine running at idle speed |
· Throttle opening less than 2 %
· The following trouble codes are not stored: 21
· Intake manifold absolute pressure greater than 950 hPa
The above conditions must apply for at least 5.3 sec.
If trouble code 33 has been detected, the control module switches the engine control lamp on.