Remove
- 1. Open bonnet
- 2. Disconnect battery • Detach ground clamp from ground terminal – Undo nut
- 3. Remove engine cover.
- 4. Remove sheathed glow plugs (1) • Disconnect 4x wiring harness plugs • Unscrew 4x sheathed glow plug
Install
- 5. Install sheathed glow plugs • Tighten 4x sheathed glow plug 10 Nm • Connect 4x wiring harness plugs
- 6. Install engine cover.
- 7. Connect battery • Attach ground clamp to ground terminal – Tighten nut
- 8. Program volatile memory
- 9. Close bonnet