Home ReviewsRefund
Home/Opel/Antara/Opel Antara I (2007-2011)/Repair manual/Fuel Injection Systems/Mass Air Flow (MAF) Sensor Assembly Replace
Contents Wiring diagrams Section: Fuel Injection Systems All sections

Mass Air Flow (MAF) Sensor Assembly Replace Opel Antara I

Fuel Injection Systems 3 illustrations ~125 words

Mass Air Flow (MAF) Sensor Assembly Install

Remove

  1. Disconnect the negative battery cable.
  2. Loosen the clamp and pull the flexible air intake duct away from the mass air flow (MAF) sensor assembly.
  3. Disconnect the MAF sensor connector.
  1. Remove the screw, two places, attaching the MAF sensor assembly (2) to the upper air cleaner housing (3).
  2. Remove the MAF sensor assembly.

Install

Note: Ensure that the arrow on the MAF sensor housing face toward the air flow direction.

  1. Install the MAF sensor assembly to the air cleaner upper housing.

Tighten

Tighten the mass air flow sensor assembly attaching screws to 2 N•m (18 lb-in).

  1. Connect the flexible air intake duct and tighten the clamp.
  2. Connect the MAF sensor connector.

More articles — Engine and Engine Aggregates